Добрый день коллеги,
оборудование NSN. В формуле "HSUPA congestion rate in Iub (%)" входит параметр (счётчик) DELAYED E-DCH FP FRAMES. Какие основные причины срабатывания счётчика? Документация даёт общий, расплывчатый ответ.
Железо, транспорт в исправном состоянии. Сектор носит дорожный характер (поля, леса, степи).
Description: The number of "Congestion indication control frame - delay build up" messages sent to the BTS due to the RNC HW overload congestion control functionality.
Updated: When the RNC Frame Protocol entity sends a "Congestion Indication control frame - delaybuild-up" indication message to the base station and the indication was triggered by congestion detected by the HW overload congestion control functionality.
NSN "HSUPA congestion rate in Iub (%)" — Общие вопросы, касающиеся принципов работы UMTS-сетей
-
- Опытный нетмониторщик
- Сообщения: 117
- Зарегистрирован: Пн, 06-08-2007, 11:22
-
- Опытный нетмониторщик
- Сообщения: 117
- Зарегистрирован: Пн, 06-08-2007, 11:22
Description: The number of delayed E-DCH FP frames; this includes frames that are delayed over the trigger value used by the congestion control algorithm (that is, delay is above the DelayThresholdMin).
Updated: When an E-DCH frame is received and detected as delayed over the trigger value used by thecongestion control algorithm.
Updated: When an E-DCH frame is received and detected as delayed over the trigger value used by thecongestion control algorithm.